Creative Army – Five Sugars PU – Double Stringer 8’6 / 9’1 / 9’6
€949.00 – €1,029.00
Description
Creative Army Five Sugars PU Double Stringer
The Five Sugars, is one of the most versatile surfboards we have created, its modern rocker and higher volume makes paddling and wave catching a dream.
It has a 2+1 fin set up, and the slightly rolled Vee bottom through the back half makes for smooth flowing rail to rail transitions. A flatter mid-section makes for fast trimming, while the concave in the front half comes into play with long extended nose rides in all sections of the wave!
Maybe you are a short boarder that wants that board for smaller days, but doesn’t want a beast and still wants the ability to roll off the top and have plenty of speed. Or perhaps you are a long boarder that wants a board to nose ride and to turn with plenty of speed in those waves that aren’t your perfect point set up. Then this is the board for you.
NOTE: Fins supplied with the board / Rider weight is based on board volume and intermediate rider skill level
Length
Width
Thick
Volume
Fins
Approx Weight Range
8’6″
23″
2 5/8″
59.7ltr
7” CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd)
90kg / 198lb or less
9’1”
23 1/4”
2 13/16”
68.8 ltr
7” CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd)
90kg / 198lb or less
9’6”
23 1/2”
3′ 1/16″
77.7 ltr
7” CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd)
90kg / 198lb +
OUTLINE: This smooth and balanced outline has a slightly pulled in tail for drive and acceleration in turns and its fuller voluptuous nose helps with extended nose riding in all sections of the wave.
ROCKER: With emphasis on being an all-rounder the Five Sugars has a medium rocker with a flat panel through the mid-section which makes this board paddle with ease and flows through those dead sections with minimal effort. A slight lift in the nose makes those late take offs easier and also helps with amazing nose riding, while the slight lift in the tail makes for nice drive and smooth tight arcs through your turns.
CONTOURS: Subtle yet effective, the longer deeper concave in the nose creates lift while hanging those toes over. Its flatter midsection creates speed and trim and the slightly rolled vee through the back half makes for ease of rail to rail transitions.
DECK LAYUP: 2 x 6oz 1 x 6oz Deck Patch
BOTTOM LAYUP: 1 x 6oz cloth 1 x 6oz Fin Patch
PERFORMANCE: As an All-rounder it paddles amazing, trims with an accelerated speed and will turns wherever you want it to go on the wave face. With a fuller nose outline, the ease of nose riding will have you hanging them with the best. From flat to double overhead this is one best all-round board you can have in your quiver! Enjoy!
CONSTRUCTION: Polyester or PU construction uses traditional materials and laminating techniques to produce a strong, reliable surfboard with high quality finishes. All polyester boards are CNC milled from the shapers files and laminated by hand using quality components such as Hexcel fiberglass, Silmar resin and Bennett foam. For years traditional polyester boards have been at the forefront of performance surfing. These boards feature a progressive flex pattern controlled by a high-grade timber stringer and feel very reliable under your feet. Polyester construction will perform in all surf conditions and can be adapted to suit a wide variety of surfboard models.
Additional information
size
9'1, 8'6, 9'6
Brand
Creative Army Surfboards
Born and bred on the Points of Noosa Heads, Australia, Josh Constable has been surfing all his life and competing for the past 20 years. To date he has a World Title, 6 Australian Titles and some 51 career titles under his belt.
Having worked along side some of the best shapers in the industry, Josh’s Brand, Creative Army, is a kaleidoscope of all his experiences, waves and relationships – a voice for his story through Creative Army’s designs, lines and shapes.
Creative Army reflects Josh’s belief in keeping it pure and to the highest standard. All boards are inspired by traditional templates, but made with the modern surfer in mind. With a contemporary fashion palette, they are made to make the beginner surf better and the most advance push themselves to their limit.
THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER
LENGTH
Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.
WIDTH
The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.
BOARD THICKNESS
Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.
ROCKER
The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.
STRINGER
Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.
FINS
Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.
FIN CONSIDERATIONS
Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.
SINGLE FIN
The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability
TWIN FIN
Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.
THRUSTER 3 FIN
Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson
QUADS 4 FINS
With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.
KEEL
Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.AcceptRead More
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
