Gerry Lopez – Pocket Rocket – Surftech Trueride PU – FCS II – 5 Fin – Blue ( 7’4 )

999.00

In stock

Description

6’10 Gerry Lopez Pocket Rocket – Trueride PU – FCS II – 5 Fin – Red

Never have an excuse for missing the best barrel of your life again. For Indo, Hawaii or anywhere 4’-8’ waves are pumping, the Pocket Rocket in Trueride PU would be the main battle board in your quiver. The Pocket Rocket delivers extra speed, maneuverability and control to make riding the edge a whole lot of fun and not as white knuckled, barely hanging in there exercise. In general, the Pocket Rocket would be anywhere in length from 6’-4” up to 8’-0” depending on the rider and where he surfs.

Dimensions Volume
6’4 x 19.375” x 2.5” 33.10 ltr
6’10 x 19.5” x 2.625” 37.60 ltr
7’4 x 20” x 2.75” 43.30 ltr
8’0 x 20.5” x 2.875” 50.60 ltr

Trueride PU

TRUERIDE boards consist of a PolyUrethane Core, PolyEster Resin, and model-specific fiberglass layups specked to achieve the right balance between weight and durability. Surftech’s TRUERIDE construction is our most traditional surfboard build, providing users with a dependable and predictable surfing experience.

  • POLYURETHANE CORE // High-density polyurethane core for performance and feel
  • POLYESTER RESIN // Advanced polyester resin for strength and flex
  • 6OZ FIBERGLASS W/4OZ FULL PATCH // High strength-to-weight ratio, balanced for performance and durability
  • WOOD-PLY STRINGER // Wood fibers create a natural flex and add break-strength
  • FCS II FIN BOXES // Takes just seconds to insert and remove the fins
  • AIRBRUSHED RAIL AND BOTTOM + PIN LINES //Long-lasting color keeps your board looking new longer
  • SANDED FINISH // The fasted finish, optimized for high-speed surfing

MR Pipeline

“WAVES KEEP COMING, THAT’S THE ONE THING YOU CAN COUNT ON IN LIFE”

Gerry Lopez grew up in the extraordinary place that was Hawaii in the 1950s and 1960s. He played a part in the shortboard revolution of the late 1960s and early 1970s. He experienced the awe, fear, and ultimate satisfaction of finding the tube in the early days at the Pipeline. He traveled for surf throughout the world: to the original surf camp at G-Land, the exotic islands off Sumatra, and especially to the magic island of Bali, Indonesia – before it became a popular surf destination. He experienced the beginnings of windsurfing on Maui, the early years of snowboarding and tow-in surfing at Jaws. Fast forward to today and Gerry Lopez is shaping some truly unique boards that keep his surfing journey moving forward. This collection of boards represents the quiver that he takes around the world to surf the ultimate breaks.

Brand

Gerry Lopez Surfboards

Mr. Pipeline

Gerry Lopez grew up in the extraordinary place that was Hawaii in the 1950s and 1960s. He played a part in the shortboard revolution of the late 1960s and early 1970s. He experienced the awe, fear, and ultimate satisfaction of finding the tube in the early days at the Pipeline. He traveled for surf throughout the world: to the original surf camp at G-Land, the exotic islands off Sumatra, and especially to the magic island of Bali, Indonesia - before it became a popular surf destination. He experienced the beginnings of windsurfing on Maui, the early years of snowboarding and tow-in surfing at Jaws.Fast forward to today and Gerry Lopez is shaping some truly unique boards that keeps his surfing journey moving forward. This collection of boards represents the quiver that he takes around the world to surf the ultimate breaks.

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier

     

    0
      0
      Your Cart
      Your cart is empty