Haydenshapes Hypto Krypto FF – FCS II – 5 Fin – B/W Inverted
The Hypto Krypto is a balance of tradition and modern performance. Suited to the elite level surfer to the everyday surfer, it is often referred to as the ‘one board quiver’ for its versatility across all types of surf conditions – from small 1-3 ft beach breaks, to barrels of up to 8ft.
The Hypto Krypto comes with 5 fin boxes for a thruster or quad setup. Haydenshapes surfboards come without fins and fin screws.
5’4 x 19 1/2″ x 2 1/4″
5’6 x 19 3/4″ x 2 3/8″
5’7 x 19 7/8” x 2 7/16”
5’8 x 20″ x 2 1/2″
5’9 x 20 1/8” x 2 9/16”
5’10 x 20 1/4″ x 2 5/8″
5’11 x 20 3/8” x 2 11/16”
6’0 x 20 1/2″ x 2 3/4″
6’2 x 20 3/4″ x 2 3/4″
6’4 x 21″ x 3″
6’6 x 21 1/2″ x 3″
6’8 x 22″ x 3 1/4″
6’10 x 22 1/2″ x 3 1/4″
7’0 x 23” x 3 3/8”
The Hypto Krypto continues to be the most versatile shape in the Haydenshapes range. The outline resembles an old school twin fin in the nose, and when combined with a high amount of volume under the chest, enables it to paddle like a dream and support rider acceleration off the front foot.
Through the back the outline pulls into a rounded pintail creating a lot of curve around the back foot. This not only provides plenty of hold in the bigger stuff, but also allows you to draw tighter arcs in the pocket. The foil also refines out to a thinner, pinched rail to keep the board connected to the wave.
The design of the rocker, which is flat throughout with a little lift in the entry, is focused on speed, enabling surfers to make sections they don’t normally expect to make. The concave runs from a rolled vee in the entry to a slight single, blending into a vee double out the tail, which gives the board great speed and control from rail-to-rail.
Overall, the Hypto Krypto is a one-stop board you can ride around the world having fun in average conditions, as well as taking to the barrel and the open face when the swell pumps!
Designed and patented by Haydenshapes founder Hayden Cox, FutureFlex is an affluent mix of modern custom designed materials and modern design innovation for high-performance surfing. The construction combines a stringer-less, high-density custom shaped EPS core laminated with biaxial fiberglass, epoxy resin and a parabolic carbon fiber frame. The carbon fiber frame within the laminate is the key to the performance vitality of the overall product. Designed to maximize speed and drive while minimizing twist, FutureFlex essentially stores and releases energy as the surfer transitions through a turn.
5'10, 5'11, 5'4, 5'6, 5'8, 5'9, 6'0, 6'2, 6'4
Hayden Shapes Surfboards
Making shapes since 1997, we are performance surfboards and contemporary fashion founded by Hayden Cox and based in Sydney, Australia and Los Angeles.
THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER
Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.
The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.
Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.
The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.
Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.
Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.
Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.
The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability
Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.
THRUSTER 3 FIN
Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson
QUADS 4 FINS
With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.
Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.