Lost Surfboards – Round Nose Fish 1996 – RNF96 – PU FCS2 ( 5’8 – 5’11 )

749.00

Description

The RNF-’96… Having shaped multiple variations of “fish” from fall 1994 – 1995, we had created a bit of momentum with the designs. Leading into Winter ’95/’96, we had refined a basic design where we were able fine tune, replicate and re-size the original RNF (by hand) with some consistency. We continued to build small quivers for both Chris Ward and Cory Lopez and sent them everywhere, with Cory taking various versions to each stop on WQS tour.

These 1996 Fish were all hand shaped and not the most consistent creations, but they became the basis and the building blocks towards offering the design to people outside our own circle of friends. They were the boards that teenaged Chris n Cory took to the North Shore and essentially made their indelible mark on the surfing universe.

The RNF-’96 is based with reverence, but not 100% compliance, to original “fish” we developed for Chris and Cory in the year leading up to the 1997 seminal surf film 5’5” x 19 1/4”. While very few specimens from this era still exist (at least in our possession) and most that do are very thin and imperfect relics of Cory’s boards (we can’t find any of Chris’ from the era, at all) some of the re-creation and execution comes down to doing what looks and feels right …and what will work best.

I still have the remains of a 5’10 x 20” x 2-5/8” personal craft. A board I carried to Durban SA, in July of ’96. This was a liberating, small wave life changing board in my path, not only as a designer, but as a surfer who struggled with the status quo boards of the mid 90’s. This board allowed me to surf very small, rip-able waves in and around the Durban Piers for a couple weeks that year. I’d never before had so many people (including other shapers) ask me “what are you riding?” and knew then we were on to something more than just frivolous fish fun. These designs were something the entire surfing world could grab on to and enjoy.
I’ve always felt the key difference between our RNF and the majority of others, from the 90’s and beyond, is the fact that our outline was always more based off of MR inspired, high performance, competitive minded, twin fins of the late 70’s/early 80’s. Relatively pulled in tails, developed through trial and error, for maximum performance and control…not just in small surf, but in all size and shape of waves.

Plainly put, most fishes since this time were predominately influenced by kneeboards. Inspired from early 70’s style, Lis inspired, wide tail, parallel outline kneeboards that transitioned well to stand up surfing in small waves, but have battled to come near peak performance of modern shortboards ever since. Our fish was always about performance, not just a crutch to go fast on in small surf.

For the sake of better surfboards, we’ve taken a touch of liberty. Based off the past 25 years of board building, we tried to create a consistent (and dare say better) surfboard, faithfully based off, but not necessarily exacting to the varied RNF of 1996. With diligent testing being done by many of our top team, including Kolohe, Coco, Ian Crane, Crosby Cola and other “guests” (and even pedestrian testing by myself) in the last few months of 2020, we are very confident that the RNF-’96 will perform at and above expectations, as an all-around, rip-able fun machine, for a wide level of surfers.

FEATURES

  • Rocker curves: Remain engrained to the original proven curves.
  • Outline curves: Both nose and tail were usually the same width at 12” and remain true, but with more precision, including added curve and width around 6” from the tail. One “secret” about the original’s success was that, unlike most all other “fish” the tail width on ours was closer to that of a typical HP Shortboard. This allows much more control off the tail than typical fish designs.
  • Bottom Contours: The classic single concave to double concave, accelerating vee combination are defining design elements and hold true to adherence.
  • The Thickness Flow, Deckline, Rails, and Tail Foil: They were all over the map in those rudimentary hand shape days. Each board was different, with most of them having noticeably different curves and thickness from one rail to the other.
  • In re-creating these boards, which one is correct? In the end, I went with gut feeling on what would work best.

Additional information

size

5'11, 5'8

Brand

Lost Surfboards

Lost surfboards began in 1985 when Matt Biolos and a bunch of school friends were into snowboarding, skateboarding, and surfing in Dana Point. They were not worried about winning surf contests they were Team Lost and the distinctive logo was born. The now legendary shaper Matt Biolos began sanding

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail). Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform. The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations. The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions. This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf. You may think that having four fins would sacrifice speed by creating more drag, but this is not the case. The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin. The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard. Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op +3170 201 5153 info@noordzeeboardstore.nl

Contact formulier

     
    0
      0
      Your Cart
      Your cart is empty