€150.00 – €160.00
This is our flagship product with all of the premium features, quality and design detail that we build into all of our products. The Tech is a seriously feature rich, high spec bag. 10mm of high density padding and ripstop nylon ensure maximum protection, while the silver polytarp side and ventilation keep your boards cool. The tail area is able to expand to accommodate boards with fins or fold flat for traveling. The buckle free removable shoulder strap has 3 attachment points so you can adjust the balance of the bag if carrying a wetsuit in the wetsuit pocket.
This is best bag for anyone looking for extra board protection day to day or for a strike surf mission when traveling light. Our bags are cut longer so a bag will fit the board that it is labelled for. ie a 6’8 bag will fit any size up to and including 6’8.
| • 10mm High Density Padding • Heat reflective Silver Polytarp Side • Ripstop Nylon Side • Water and Wax Proof Interior Polytarp • Removeable Strap and Padded Carry Handle • 3 x Shoulder Strap Loops |
• Extra Reinforced Nose and Tail • Expanding Fin Area • Corrosion Free Zippers • ID Badge • Ventilation • Wetsuit Pocket |
also check out ROAM SURF leashes and tail pads!
| size | 8'6, 9'2, 9'6 |
|---|
Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.
The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.
Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.
The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.
Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.
Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.
Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.
The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability
Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.
Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson
With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.
Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op
+3170 201 5153
info@noordzeeboardstore.nl
