Channel Islands Large – Futures Compatible – large
€99.95
3 Fin Set ) Futures Compatible: High rake and lots of area throughout, this template favors power surfers and performs well in solid sized conditions. All 3 fins are the same size and originate from the glass-on fins which True Ames used to produce for all nearly of the Channel Islands boards back in the 80’s and early 90’s. Needless to say, these fins are tried and true and are still one of our prized classic and timeless designs.
HEIGHT: 4.75″ / 120 mm BASE: 4.60″ / 117 mm AREA: 16.17″² / 104.34 cm²
Since 1969, Channel Islands Surfboards has been dedicated to performance and quality through hard work, innovation, and originality. Over the last 50 years, Channel Islands has grown from a local grass-roots operation to a cutting edge organization, catering to the best surfers in the world. It started with hard-core surfing and quality in mind and these guidelines have brought us through four decades of constant change in the surf industry. Channel Islands will shape the new millennium with innovative design and quality as our main focus.
“The driving force behind CI Surfboards is the demand on design created by the world’s greatest surfers, allowing for the highest performance surfing possible. To provide the most dedicated surfers with the most advanced, performance designs is my passion” - Al Merrick, Designer/Shaper
CI is a privately held organization focused on rider-driven product and manufacturing the best possible equipment available. Located in a state-of-the-art facility just blocks from Rincon Del Mar, the CI HQ represents a foundation for developing, testing, and building boards while providing jobs in Santa Barbara for many years to come.
Channel Islands Surfboards was created by Al and Terry Merrick in 1969. From his birth, Britt spent his days in the factory by the beach in Santa Barbara, from toddling around blanks to sweeping out shaping rooms. Eventually he started shaping alongside his father Al in 1990. He is now the lead shaper and designer for CI and carries on the family tradition of developing high performance board designs collaborating with the world’s greatest surfers. From Tom Curren, to Dane Reynolds, Channel Islands continues to evolve with the highest standard of surfing.
True Ames
True Ames has been crafting the highest quality surfboard fins made from the best materials available for close to 40 years. We offer a wide variety of fins within our collection in order to support an array of wave riding vehicles. We pride ourselves in balancing a surfer and shaper driven design ethic with our commitment to innovation and production excellence. Our mission is simply to provide our customers with the best fins and performance money can buy.
THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER
LENGTH
Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.
WIDTH
The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.
BOARD THICKNESS
Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.
ROCKER
The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.
STRINGER
Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.
FINS
Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.
FIN CONSIDERATIONS
Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.
SINGLE FIN
The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability
TWIN FIN
Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.
THRUSTER 3 FIN
Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson
QUADS 4 FINS
With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.
KEEL
Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.AcceptRead More
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
